Specifications
Dimensions
- Frame Size324T
- Service Factor1.15
- Shaft Diameter2.1250 in
- Torque118.1 ft-lbs
- Weight450 lbs
Details
- Base RPM1475 rpm - 1780 rpm
- Country of OriginMEX
- DescriptionU.S. Motors® WORLD MOTOR line from Nidec Motor Corporation will keep your fans, blowers, compressors, pumps, material handling and other equipment operating reliably, around the clock. Our offering of general purpose motors is extensive, ranging from open drip proof (ODP) to UNIMOUNT® and cast-iron motors. Damp, dusty or dirty environments are no match for our TEFC three-phase motors, which are built to withstand a variety of harsh and corrosive conditions. From all cast-iron frames to special paint and oxide primers, these motors are protected – inside and out – helping to extend their thermal and mechanical life.
- Duty Condition TypeContinuous Duty
- Enclosure TypeTEFC (Totally Enclosed Fan Cooled)
- Frame MaterialCast Iron
- Frequency Rating50/60 Hz
- Full Load Efficiency94.1 %
- Harmonization Code8501.52.8000
- Insulation ClassF
- Manufacturer Upc Number786382123451
- Max Allowable Current46 A, 54 A, 92 A, 107 A
- ModelGC03
- Motor Horsepower40 hp
- Motor Phase3 ph
- Motor Poles4
- Motor Supply Voltage200/400//230/460 V
- Mounting TypeHorizontal / Foot
- NEMA Design ClassB
- Opposite Drive End Bearing6211-2Z-J/C3
- Product TypeGeneral Purpose Motors
- Product TypesAC Motors
- Standards MetEE, NEMA Premium
- Synchronous Rpm1800 rpm
- UPC_NO786382123451
Overview
Mfr description
HD40P2E 40 HP 4P 324T 230/460 200/400 V
- Class F insulation, Class B rise at full load on 60 Hz sine wave power
- Cast iron frame, cast iron end brackets
- Corrosion-resistant mill- and chemical-duty paint
- Stainless steel nameplate (with CE mark) and zinc-plated hardware
- Shaft slinger on pulley end for IP54 protection
- Dual voltage 230V/460V (1 hp to 100 hp)
- 40°C ambient, NEMA® design B performance on 60 Hz sine wave power
- Regreasable ball bearings for sizes 250 and up, lifting provisions for sizes 180 and up
- Self-certified Class I, Division 2, Groups A, B, C and D
- Double-shielded bearings for sizes 140 to 360, open on sizes 400 to 440
- 1.15 service factor at 60 Hz
- Suitable for 20:1 (3 Hz to 60 Hz) variable torque; 5:1 (12 Hz to 60 Hz) constant torque on inverter power
- Steel fan cover and conduit box
- Field convertible to F2 mounting
- Condensation drains with plastic plugs
- Conversion kits: All cast iron upgrade, C and D flanges, canopy kits
- Applications: Pulp and paper plants, saw mills, mines, foundries, chemical plants, waste management facilities, and other process-related industries requiring protection within harsh operating conditions
- Manufacturer: U.S. Motors
Compliance & Safety Data
Click on an icon below to learn more about the compliance and safety data
