Specifications
Dimensions
- Frame Size213TC
- Overall Length C Dimension20.4 in
- Service Factor1.15
- Torque22.2 ft-lbs
- Weight180 lbs
Details
- Base RPM1465 rpm - 1770 rpm
- Country of OriginMEX
- DescriptionU.S. Motors® WORLD MOTOR line from Nidec Motor Corporation will keep your fans, blowers, compressors, pumps, material handling and other equipment operating reliably, around the clock. Our offering of general purpose Motors is extensive, ranging from open drip proof (ODP) to UNIMOUNT® and cast-iron Motors. Damp, dusty or dirty environments are no match for our TEFC three-phase Motors, which are built to withstand a variety of harsh and corrosive conditions. From all cast-iron frames to special paint and oxide primers, these Motors are protected - inside and out - helping to extend their thermal and mechanical life.
- Duty Condition TypeContinuous Duty
- Enclosure TypeTEFC (Totally Enclosed Fan Cooled)
- Frame MaterialCast Iron
- Frequency Rating50/60 Hz
- Full Load Efficiency91.7 %
- Harmonization Code8501.52.4000
- Insulation ClassF
- Manufacturer Upc Number786382122218
- Max Allowable Current9.6 A, 11.1 A, 19.1 A, 22.2 A
- ModelGE35
- Motor Horsepower7-1/2 hp
- Motor Phase3 ph
- Motor Poles4
- Motor Supply Voltage200/400//230/460 V
- Mounting TypeHorizontal / Foot
- NEMA Design ClassB
- Opposite Drive End Bearing6206-J/C3
- Product TypeGeneral Purpose Motors
- Product TypesAC Motors
- Standards MetEE, NEMA Premium
- Synchronous Rpm1800 rpm
- UPC_NO786382122218
Overview
Mfr description
CD7P2EC 7 1/2HP 4P 213TC 230/460 200/400
- Class F Insulation, Class B rise at full load on 60 Hz sine wave power
- Cast iron construction
- Corrosion-resistant mill- and chemical-duty paint
- Stainless steel nameplate (with CE Mark) and zinc-plated hardware
- Dual bearing seals on pulley end for IP55 protection
- Dual voltage 230/460V (1 hp to 100 hp)
- Precision balance (less than 0.08 in/sec vibration)
- 40°C ambient, NEMA® design B performance on 60 Hz sine wave power
- 1.15 service factor at 60 Hz
- Self-certified Class I, Division 2, Groups A, B, C and D
- Suitable for 20:1 (3 Hz to 60 Hz) variable torque; 5:1 (12 Hz to 60 Hz) constant torque on inverter power
- Regreasable open bearings
- Lifting provisions, epoxy-coated rotor
- Field convertible to F2 mounting
- Brass breather condensation drains
- Oversized conduit box (one size larger than NEMA standard)
- Cast iron inner bearing caps
- Conversion kits: C and D flanges, canopy kits
- Manufacturer: U.S. Motors
Compliance & Safety Data
Click on an icon below to learn more about the compliance and safety data
