Specifications
Dimensions
- Frame Size284TS
- Overall Length C Dimension26.2 in
- Service Factor1.15
- Shaft Diameter1.6250 in
- Torque36.9 ft-lbs
- Weight330 lbs
Details
- Base RPM2955 rpm - 3560 rpm
- Country of OriginMEX
- DescriptionU.S. Motors® WORLD MOTOR line from Nidec Motor Corporation will keep your fans, blowers, compressors, pumps, material handling and other equipment operating reliably, around the clock. Our offering of general purpose Motors is extensive, ranging from open drip proof (ODP) to UNIMOUNT® and cast-iron Motors. Damp, dusty or dirty environments are no match for our TEFC three-phase Motors, which are built to withstand a variety of harsh and corrosive conditions. From all cast-iron frames to special paint and oxide primers, these Motors are protected - inside and out - helping to extend their thermal and mechanical life.
- Duty Condition TypeContinuous Duty
- Enclosure TypeTEFC (Totally Enclosed Fan Cooled)
- Frame MaterialCast Iron
- Frequency Rating50/60 Hz
- Full Load Efficiency91.7 %
- Harmonization Code8501.52.8000
- Insulation ClassF
- Manufacturer Upc Number786382120627
- Max Allowable Current28.8 A, 33 A
- ModelGA29
- Motor Horsepower25 hp
- Motor Phase3 ph
- Motor Poles2
- Motor Supply Voltage400-460 V
- Mounting TypeHorizontal / Foot
- NEMA Design ClassB
- Opposite Drive End Bearing6210-J/C3
- Product TypeGeneral Purpose Motors
- Product TypesAC Motors
- Standards MetEE, NEMA Premium
- Synchronous Rpm3600 rpm
- UPC_NO786382120627
Overview
Mfr description
CD25P1FS 25 HP 2P 284TS 460 400 V
- Class F Insulation, Class B rise at full load on 60 Hz sine wave power
- Cast iron construction
- Corrosion-resistant mill- and chemical-duty paint
- Stainless steel nameplate (with CE Mark) and zinc-plated hardware
- Dual bearing seals on pulley end for IP55 protection
- Dual voltage 230/460V (1 hp to 100 hp)
- Precision balance (less than 0.08 in/sec vibration)
- 40°C ambient, NEMA® design B performance on 60 Hz sine wave power
- 1.15 service factor at 60 Hz
- Self-certified Class I, Division 2, Groups A, B, C and D
- Suitable for 20:1 (3 Hz to 60 Hz) variable torque; 5:1 (12 Hz to 60 Hz) constant torque on inverter power
- Regreasable open bearings
- Lifting provisions, epoxy-coated rotor
- Field convertible to F2 mounting
- Brass breather condensation drains
- Oversized conduit box (one size larger than NEMA standard)
- Cast iron inner bearing caps
- Conversion kits: C and D flanges, canopy kits
- Manufacturer: U.S. Motors
Compliance & Safety Data
Click on an icon below to learn more about the compliance and safety data
