Overview
Mfr description
968106-RAIL BRAKE FOR THK-SHS 30 MM RAIL
- Large friction facing contact area for consistent performance and low rail wear
- Field serviceable friction facing replacement
- Ideal for power-off, e-stop and holding applications
- Low backlash for accurate position holding
- Brake geometry is similar to linear bearing cassettes for easy installation
- Provides stiffness and eliminates vibration in linear drives
- Large clearance between brake and rail compensates for installation misalignment
- No lubrication or periodic maintenance required
- Models available to fit most common profile guide rails
- Highest spring engaged / air released holding force on the market
- Static holding cycle life in excess of one million cycles
Specifications
- Rail Size30 mm
- Rail Carriage ManufacturerTHK
- Rail SeriesSHS
- Brake SeriesRB30B
- Holding Force292 lbs
- Engagement/ReleaseSpring/Air
- Port SizeM6x1.0
- FinishBlack Oxide
- FunctionStopping & Holding
- Max Backlash At Full Brake Force0.008 in
- Minimum Release Pressure80 psi
- Max Pressure132 psi
- Air Chamber Volume13.400 cm³
- Approximate Engagement Response Time0.070 sec
- Mass3.40 lbs
- BacklashLess Than 0.20 mm
- Overall Length3.937 in
- Overall Width3.524 in
- Overall Height1.378 in
- Life RatingMore than 1,000,000 static holding cycles
- RatingsCE & RoHS
- Weight3.80 lbs
- Additional DetailsNot for use in cyclic dynamic braking applications.
- Manufacturer Product Page
- Manufacturer Catalog
- 2D Drawing
Compliance & Safety Data
Click on an icon below to learn more about the compliance and safety data
