Overview
Mfr description
7-1/2HP 3600RPM N317A TEFC 230/460V 184T
- Motors are suitable for 10:1 VT and 10:1 CT MAX GUARD® Class F insulation system 1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power Double sealed ball bearings 303 Stainless steel shaft with spring loaded contact seals in each endshield Stainless steel conduit box cover, nameplate, fan guard (TEFC) and hardware Cast oversized conduit box with high temperature nitrile gaskets and threaded entrance Plugged drain holes in each endshield for all angle mounting Internal corrosion resistant coatings on frame, base, endshields, rotor and stator F1 mounting only, cannot reassemble to F2
Specifications
- Motor CategoryWashdown Duty Motors
- Motor Phase3 ph
- Motor Horsepower7-1/2 hp
- Synchronous Rpm3600 rpm
- Motor Supply Voltage230/460 V
- Frame Size184T
- Enclosure TypeTEFC (Totally Enclosed Fan Cooled)
- Frequency Rating60 Hz
- Duty Condition TypeContinuous Duty, Washdown Duty
- Assembly Box MountingF1/F2 CAPABLE
- Base RPM3500 rpm
- Thermal ProtectionNo
- Ambient Temperature Range40 °C
- Electrical TypeSquirrel Cage Inverter Rated
- KVA CodeL
- Starting MethodLine Or Inverter
- kW5.60 kW
- Full Load Current17.6/8.8 A
- Full Load Efficiency89.5 %
- Motor OrientationHorizontal
- Motor Poles2
- Description Keyword7.50 hp
- Shaft TypeT
- Shaft Diameter1.1250 in
- Shaft RotationReversible
- Motor Length Less Shaft10.50 in
- Overall Length C Dimension15.96 in
- Drive End Bearing SizeBall
- Opposite Drive End Bearing SizeBall
- Opposite Drive End Bearing Type6205
- Type Of BearingBall
- NEMA Design ClassA
- Frame MaterialRolled Steel
- Insulation ClassF
- IP Rating55
- Standards MetCE, CSA, UL
- Weight103 lbs
- Manufacturer Product Page
- Manufacturer Upc Number722856028921
- UPC_NO722856028921
- 2D Drawing
- Wiring Diagram
- Mounting TypeRigid Base
- Product TypeWashdown Duty Motors
Compliance & Safety Data
Click on an icon below to learn more about the compliance and safety data
