Specifications
Dimensions
- Drive End Bearing Size6203
- Frame Size48Z
- Opposite Drive End Bearing Size6203
- Overall Length12.0000 in, 304.80 mm
- Overall Length C Dimension12.00 in
- Service Factor1.00
- Shaft Diameter0.5000 in
- Weight12 lbs
Details
- 2D Drawing
- Additional DetailsAutomatic Reset Thermal Protector;Iris Insulation System;Permanently Lubricated;Double-Sealed Bearings;Ambient Temperature Up To 70°C;Vertical/Horizontal Mounting;Csa Certified And Ul Recognized
- Ambient Temperature Range104 °F;40 °C
- Assembly Box MountingF1
- Base RPM1625 rpm
- Country of OriginMexico
- DescriptionHP:0.25, F#48Z, RPM:1800, 208-230V, OPAO
- Description Keyword0.25 hp
- Duty Condition TypeContinuous Duty
- Electrical TypePermanent Split Capacitor
- Enclosure TypeOAO (Open Air-Over)
- Frame MaterialRolled Steel
- Frequency Rating60 Hz
- Full Load Current1.9 to 1.8 A
- Full Load Efficiency70 %
- Full Load Torque12.40 ft-lbs;16.81 N-m
- Harmonization Code8501.40.4040
- Hp0.25 hp
- Insulation ClassB
- IP Rating10
- KVA CodeC
- kW0.19 kW
- Manufacturer Catalog NumberX012
- Manufacturer Product Page
- Manufacturer Upc Number722856048899
- Model48A17O2006E
- Motor CategoryAir Handling (HVAC) Motors
- Motor Horsepower1/4 hp
- Motor OrientationHorizontal
- Motor Phase1 ph
- Motor Poles4
- Motor Supply Voltage208-230 V
- Mounting TypeResilient Rings / Extended Stud
- Number Of Speeds1
- Overload ProtectorAutomatic
- Product TypeAir Handling (HVAC) Motors
- Shaft TypeSingle Special Extension
- Standards MetCSA, UL
- Synchronous Rpm1800 rpm
- Thermal ProtectionAutomatic Lock Rotor Only
- Type Of BearingBall
- UPC_NO722856048899
- Voltage208 to 230 V
- Wiring Diagram
Overview
Mfr description
1/4HP 1800RPM X012 OPAO 208-230V 48Z 1PH
- Single speed model Weather resistant reversing plug 30” long leads Shaft with flat Shaft slinger 1” Extended thru-bolts on shaft end Automatic reset thermal protector Lug mount kits and other accessories available (see Accessories section) Resilient ring mount, base not included 1" thru-bolts, opposite shaft end