Specifications

• Series
  10000 - Wheel
• Displacement
  20.98 in³/r
• Max Operating Temperature
  180 °F
• Output Shaft Size
  2-1/4 in Tapered - Threaded Shaft
• Drain Connection Size
  .5625-18 Unf-2b O-ring Port Size -6
• Operation Rating Description
  Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every Minute / Peak Operation - 1 Percent Of Every Minute
• Port Orientation
  Staggered Ports
• Replacement Balance Ring
  004, 003 & 002 Design 21318-000 - 1 Required
• Replacement Bearing Spacer
  004, 003 & 002 Design - 6181-000 - 1 Required
• Replacement Buna Seal Kit
  004, 003 & 002 Design - Motor Seal Kit 6405-000, Shaft Seal Kit 6406-000 - 1 Required Each
• Replacement Drive - Sold Separately
  004, 003 & 002 Design - 6395-000 - 1 Required
• Replacement Drive Valve
  004, 003 & 002 Design 6168-000 - 1 Required
• Replacement Front Bearing Spacer
  004, 003 & 002 Design - 6175-000 - 1 Required
• Replacement Geroler - Sold Separately
  004, 003 & 002 Design - 8573-001 - 1 Required
• Replacement Housing Bearing Side Fnt
  004, 003 & 002 Design - 62008-000 - 1 Required
• Replacement Long Cap Screw Cap End
  004, 003 & 002 Design -14410-003 - 4 Required
• Replacement Output Shaft
  003 Design - 8483-000 - 1 Required
• Replacement Plate Valve
  004, 003 & 002 Design 8957-000 - 1 Required
• Replacement Radial Bearing
  004, 003 & 002 Design - 9003-002 - 2 Required
• Replacement Rear Housing
  004, 003 & 002 Design - 62505-000 - 1 Required
• Replacement Valve Sold Separately
  004, 003 & 002 Design 6792-000 - 1 Required
• Replacement Wear Place
  004, 003 & 002 Design 8958-000 - 1 Required
• Actual Mounting Flange
  4-Bolt Flange - Wheel - With 7 In. Pilot Dia.
• Intermittent Pressure
  275 bar
• Maximum RPM-Continuous
  254 rpm
• Mounting Type
  4-Bolt Flange - 7 in Pilot