Specifications
Dimensions
- Bore - Side 1360 mm
- Bore - Side 2360 mm
- Bore Diameter360 mm
- Coupling Length175 mm
- Min Bore Diameter360 mm
- Outside Diameter590 mm
- Overall Length175 mm
- Weight450.0 kg
Details
- Coupling MaterialSteel
- Coupling TypeShrink Disc
- DescriptionKEYLESS BUSHING
- Harmonization Code8483608000
- Hub Surface Pressure238 N/mm
- LubricationMaintenance Free
- Manufacturer Catalog Number4071-360
- Manufacturer Product Page
- Manufacturer Upc Number842058112874
- Maximum Transmitted Torque463000 Nm
- Number Of Locking Screws24
- Product TypeKeyless Locking Rigid Couplings
- Screw MaterialSteel
- Screw Type / MaterialCap Screw
- SeriesRfN 4071
- Torque Rating (in-lb)341491 ft-lb
- Transmissible Axial Force3310 kN/lbs
- UPC_NO842058112874
Overview
Mfr description
RFN 4071- 360 SHRINK DISC
- Slit inner ring – low losses and pressure on the hub.
- Extension of the RINGFEDER® RfN 4061 series from an internal diameter of 220 mm up to the largest diameters. Cost-efficient solution with high capacity in the largest possible range of applications. The preload force can be set targeted to the relevant application.
- Unlimited range of applications – RINGFEDER® Shrink Disc connections are suitable for securing all types of hubs onto shafts and axles. Replacing traditional shrink fits, keys and polygon connections, splined shafts etc. So cog wheels and sprockets, levers, lifters, cam discs, pulleys or brake discs, balance wheels, couplings, slip on gear mechanisms, flanges, pulley wheels and rotors can be attached absolutely reliable.
- Standard series – this is the most popular shrink disc. High transmission values are possible and by varying the screw tightening torque the Shrink Disc can be adapted to the design specification.
- Compensation of small tolerance errors – please contact our engineers.
- Maximum reliability – suitable for static, dynamic and impact loads.
- Slitted inner ring – low forces and pressures on hub and shaft.
- Simplified manufacture – only plain shaft and bore diameters with easily achieved surface finish and tolerances are required.
- Easy replacement – The RINGFEDER® shrink disc is free from any form fit.
- Easy mounting – no steps, keyways, splines are required, therefore hubs can be located and locked at any point or angle on the shaft. RINGFEDER® Shrink Discs use standard screws tightened with standard tools. No additional machining or fitting work is required.
- Easy removal – after loosening the locking screws, the RINGFEDER® Shrink Disc will self release and the hub will move freely on the shaft.
- Low susceptibility to contamination – when the locking screws are tightened the functional contact surfaces are pressed firmly together and prevent the ingress of dirt and moisture.
Compliance & Safety Data
Click on an icon below to learn more about the compliance and safety data
